How to purchase an additional IPv4?

You need to go to the section of your service in your personal account, select it with a click, and go to the page of IP addresses associated with it:

On this page, you can see active addresses for your service. In addition to this, you can also order new ones. Use the appropriate button.

In this menu, you need to specify the number of IPv4 addresses you want to order. Check the box for service restart and pay for the additional addresses as required.

An additional IPv4 will be automatically added to your service. Issuing additional IPv4 addresses for dedicated servers may take a little more time.

Adding an IP Address to the System

First, we need to find out the subnet mask of our address. To do this, return to/navigate to the IP address page of your service, where you will find the corresponding information. Copy or remember this value.

Now let's connect to our server. After that, right-click on the network icon and select "Network and Internet Settings."

Go to "Change adapter options."

Right-click on the adapter of our network and go to "Properties."

Select "Internet Protocol Version 4 (TCP/IPv4)" and click on "Properties."

Here is the information about our main IP address. Go to "Advanced."

Click "Add."

Specify the IPv4 address you purchased and the subnet mask according to the information from the Billing system.

Click "Add," and then "OK."

And again.

Great. Close the remaining tabs. Now let's check the result of our work. Open the Windows Command Prompt (CMD) and use the command:


Done! The additional address has been successfully added to our system.